Switch Covers Compatibility Checker

Find your switch in our tested results, or check its measurements if you don’t know the model or can’t find it.

Choose from two installation methods

Compare the two ways to fit the backplate below. The ‘Find your switch’ section shows compatibility results and any additional requirements for each installation method.

Method 1Backplate mounted over switch

The IYOKI backplate sits in front of the existing switch.

Backplate mounted over switch
  1. Turn the backplate so the IYOKI logo faces you.
  2. Align it over the switch.
  3. Refit and tighten the switch screws.

For switches with removable frames or rocker switches, remove the parts listed under Additional requirements for your switch.

Method 2Backplate mounted behind switch

The IYOKI backplate sits behind the existing switch, between the switch and the wall or backbox.

Backplate mounted behind switch
  1. Gently pull the switch forward.
  2. You do not need to disconnect the wires. Twist the bottom split of the backplate slightly open and slide the backplate around the connected wires.
  3. Position it behind the switch, then refit and tighten the switch screws.

For switches with removable frames or rocker switches, remove the parts listed under Additional requirements for your switch.

Compare our collections

Open a collection to view its supported switch dimensions.

IYOKI Classic SDIMV2 switch coverClassic
Check 1: Screw spacing60 mm horizontally (centre to centre)
Check 2: Width and heightUp to 92 × 92 mm
Check 3: DepthUp to 15.5 mm
IYOKI Standard SDIMV2 switch coverStandard
Check 1: Screw spacing60 mm horizontally (centre to centre)
Check 2: Width and heightUp to 86 × 86 mm
Check 3: DepthUp to 14 mm
IYOKI Pro SDIMV2 switch coverPro
Check 1: Screw spacing60 mm horizontally (centre to centre)
Check 2: Width and heightUp to 86 × 86 mm
Check 3: DepthUp to 9 mm
About measurement compatibility

Check your switch against the dimensions below. Fit also depends on its shape and the installation method. Select the tab for guidance. Tested model results are available for Pro and Standard; use the dimensions below to assess Classic compatibility. If you’re unsure, contact us with photos and measurements.

How to measure your switch

Choose your country to view the measuring guide. Follow Checks 1, 2 and 3, then open your chosen collection above to check your measurements.

UK

The fixing screws are often visible on the front. Measure the plate if it stays in place.

Horizontal mounting screw centres
Check 1: Screw spacingMeasure horizontally between the centres of the two mounting holes. On European style switches, the frame may hide these holes.
Switch width and height
Check 2: Width and heightMeasure the parts that the cover and backplate must fit around. A removable frame may be taken off where the installation method allows.
Switch side view and depth
Check 3: DepthMeasure from where the backplate will sit to the furthest point of the switch. If the rocker switch will be removed, measure without it.
European

The frame and rocker switch often conceal the mechanism and fixing screws. If these parts will be removed for fitting, measure the parts that remain.

Horizontal mounting screw centres
Check 1: Screw spacingMeasure horizontally between the centres of the two mounting holes. On European style switches, the frame may hide these holes.
Switch width and height
Check 2: Width and heightMeasure the parts that the cover and backplate must fit around. A removable frame may be taken off where the installation method allows.
Switch side view and depth
Check 3: DepthMeasure from where the backplate will sit to the furthest point of the switch. If the rocker switch will be removed, measure without it.
🌍 Other Countries

Our switch covers are primarily designed for the European market, but they may also fit switches used in other countries.

If your switch is secured by two horizontal screws spaced 60 mm apart, measured centre to centre, there’s a good chance our covers will fit, provided it also meets the dimensions for your chosen collection.

We strongly recommend contacting us before ordering, ideally with photographs and measurements of your switches, so we can advise on compatibility.

Find your switch

Search by brand, range or model.

About these results
CompatibleFits using this installation method, provided any listed additional requirements are met.
Not CompatibleDoes not fit using this installation method.
BorderlineFit is tight or close to the cover’s clearance limits. Small differences between switches or installations may affect whether it fits.

Related models that have not been individually tested are listed under ‘More information’ and are likely to follow the same results as the tested model.

We test compatibility as thoroughly as possible, but the wide variety of switch models, manufacturing changes and small dimensional differences mean we can’t guarantee every fit. If we list your switch as compatible and it doesn’t fit, please contact us and we’ll help you find a solution.

Share your switch compatibility

Already fitted an IYOKI cover? Tell us how it went so we can improve the checker.

Reports are reviewed before they are used. Please leave out personal or contact details.

Axiom / CED Decorative Flat
Axiom / CED

Decorative Flat

Model tested: FS32BN

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleNot Compatible
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Axiom / CED - axiom wiring accessories (ced-elec.co.uk)
BG Nexus Flatplate Screwless
BG

Nexus Flatplate Screwless

Model tested: FSB43

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame.
Compatible
Additional requirementsRemove frame.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

F*12 - 1 rocker switch, two-way
F*13 - 1 rocker switch, intermediate
F*42 - 2 rocker switches
F*43 - 3 rocker switches

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

BG - bg cataglogue flatplate screwless 2023 (bgelectrical.uk)
BG Nexus Flatplate Screwed
BG

Nexus Flatplate Screwed

Model tested: SBS43

Installation methodProStandard
Method 1
Backplate mounted over switch
CompatibleCompatible
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

S*12 - 1 rocker switch, two-way
S*13 - 1 rocker switch, intermediate
S*42 - 2 rocker switches
S*43 - 3 rocker switches

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

BG - bg brcdoc en 20231110nh bg flatplate screwed (bgelectrical.uk)
BG Evolve
BG

Evolve

Model tested: PCDMB43B

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame.
Compatible
Additional requirementsRemove frame.
Method 2
Backplate mounted behind switch
Not CompatibleNot Compatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

PCD*12* - 1 rocker switch, two-way
PCD*13* - 1 rocker switch, intermediate
PCD*42* - 2 rocker switches
PCD*43* - 3 rocker switches

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

BG - Evolve product reference (bgelectrical.uk)
Click Definity Screwless / Definity Complete
Click

Definity Screwless / Definity Complete

Model tested: SIN013PW

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame.
Compatible
Additional requirementsRemove frame.
Method 2
Backplate mounted behind switch
Not CompatibleNot Compatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

SIN011* / SF*011* - 1 rocker switch (insert / complete)
SIN012* / SF*012* - 2 rocker switches (insert / complete)
SIN013* / SF*013* - 3 rocker switches (insert / complete)
SIN025* / SF*025* - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Click - Definity Screwless / Definity Complete product reference (scolmore.com)
Click Define
Click

Define

Model tested: FPSS413WH

Installation methodProStandard
Method 1
Backplate mounted over switch
CompatibleCompatible
Method 2
Backplate mounted behind switch
Not CompatibleNot Compatible
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

FP*411* - 1 rocker switch
FP*412* - 2 rocker switches
FP*413* - 3 rocker switches
FP*425* - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Click - Define product reference (scolmore.com)Click - Define product reference (scolmore.com)
Crabtree Platinum
Crabtree

Platinum

Model tested: 7173/SC

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame.
Compatible
Additional requirementsRemove frame.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
Additional requirementsRemove frame.
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

7170/* - 1 rocker switch
7172/* - 2 rocker switches
7173/* - 3 rocker switches
7175/* - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Crabtree - DataSheet 7172 HPC (docs.electrium.co.uk)
Eurolite Enhance Flat
Eurolite

Enhance Flat

Model tested: EFSSS3SWSSW

Installation methodProStandard
Method 1
Backplate mounted over switch
CompatibleCompatible
Method 2
Backplate mounted behind switch
Not CompatibleNot Compatible
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

EF*1SW* - 1 rocker switch
EF*2SW* - 2 rocker switches
EF*3SW* - 3 rocker switches
EF*INT* - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Eurolite - Wiring Accessories Catalogue 2021
Eurolite Concealed 3mm Screwless
Eurolite

Concealed 3mm Screwless

Model tested: ECW3SWW

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and seal.
Compatible
Additional requirementsRemove frame and seal.
Method 2
Backplate mounted behind switch
Not CompatibleNot Compatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

EC*1SW* / AB1SW* - 1 rocker switch
EC*2SW* / AB2SW* - 2 rocker switches
EC*3SW* / AB3SW* - 3 rocker switches
EC*INT* / ECW1NT* / ABINT* - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Eurolite - Wiring Accessories Catalogue 2021
G and H Flat Line
G and H

Flat Line

Model tested: FFB3B

Installation methodProStandard
Method 1
Backplate mounted over switch
CompatibleCompatible
Method 2
Backplate mounted behind switch
BorderlineCompatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

F*1B / F*1W / F*301* - 1 rocker switch
F*2B / F*2W / F*302* - 2 rocker switches
F*3B / F*3W / F*303* - 3 rocker switches
F*5B / F*5W / F*305* - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

G and H - Flat Line product reference (gandhelectrical.co.uk)
G and H Lexus
G and H

Lexus

Model tested: LSS303

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame.
Compatible
Additional requirementsRemove frame.
Method 2
Backplate mounted behind switch
Not CompatibleNot Compatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

L*301 - 1 rocker switch
L*302 - 2 rocker switches
L*303 - 3 rocker switches
L*305 - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

G and H - Lexus product reference (gandhelectrical.co.uk)
Hamilton Sheer G2
Hamilton

Sheer G2

Model tested: 8G2MWR23WH-W

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and seal.
Compatible
Additional requirementsRemove frame and seal.
Method 2
Backplate mounted behind switch
Not CompatibleNot Compatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

8G2*R21* - 1 rocker switch
8G2*R22* - 2 rocker switches
8G2*R23* - 3 rocker switches
8G2*R31* - 1 intermediate
8G2*R32* - 2 intermediates
8G2*R21R31* - two-way + intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Hamilton - Sheer G2 product reference (hamilton-litestat.com)
Hamilton Sheer
Hamilton

Sheer

Model tested: 81R23PB/WH

Installation methodProStandard
Method 1
Backplate mounted over switch
CompatibleCompatible
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

*R21* - 1 rocker switch
*R22* - 2 rocker switches
*R23* - 3 rocker switches
*R31* - intermediate
*R32* - 2 intermediates
*R21R31* - two-way + intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Hamilton - Sheer product reference (hamilton-catalogue.co.uk)
Knightsbridge Flat Plate
Knightsbridge

Flat Plate

Model tested: FP4000BC

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleNot Compatible
Method 2
Backplate mounted behind switch
Not CompatibleNot Compatible
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

FP2000* - 1 rocker switch
FP3000* - 2 rocker switches
FP4000* - 3 rocker switches
FP1200* - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Knightsbridge - Flat Plate, brushed chrome
Knightsbridge Screwless
Knightsbridge

Screwless

Model tested: SF4000BC

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleNot Compatible
Method 2
Backplate mounted behind switch
Not CompatibleNot Compatible
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

SF2000* - 1 rocker switch
SF3000* - 2 rocker switches
SF4000* - 3 rocker switches
SF1200* - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Knightsbridge - Screwless, brushed chrome
LAP Screwed Flat Plate
LAP

Screwed Flat Plate

Model tested: 61104 / SBN43-XD

Installation methodProStandard
Method 1
Backplate mounted over switch
CompatibleCompatible
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

LAP Screwless Flat Plate
LAP

Screwless Flat Plate

Model tested: 174KJ / FSL43-XD

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame.
Compatible
Additional requirementsRemove frame.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

F*12-XD - 1 rocker switch, two-way
F*13-XD - 1 rocker switch, intermediate
F*42-XD - 2 rocker switches
F*43-XD - 3 rocker switches

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Schneider Ultimate Slimline
Schneider

Ultimate Slimline

Model tested: SF4912J / GU1032

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleNot Compatible
Method 2
Backplate mounted behind switch
Not CompatibleNot Compatible
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

GU1012 / GU1012GY - 1 rocker switch
GU1022 / GU1022GY - 2 rocker switches
GU1032 / GU1032GY - 3 rocker switches
GU1014 / GU1014GY - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Schneider Electric - Ultimate Slimline GU1032Schneider Electric - Wiring Accessories Catalogue
Schneider Ultimate Low Profile
Schneider

Ultimate Low Profile

Model tested: SF9231J / GU1532WPC

Installation methodProStandard
Method 1
Backplate mounted over switch
CompatibleCompatible
Method 2
Backplate mounted behind switch
Not CompatibleNot Compatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

GU1512* - 1 rocker switch
GU1522* - 2 rocker switches
GU1532* - 3 rocker switches
GU1514* - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Schneider Electric - Ultimate Low Profile catalogue
Schneider Ultimate Screwless
Schneider

Ultimate Screwless

Model tested: GU1432BPC

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and seal.
Compatible
Additional requirementsRemove frame and seal.
Method 2
Backplate mounted behind switch
Not CompatibleNot Compatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

GU1412* - 1 rocker switch
GU1422* - 2 rocker switches
GU1432* - 3 rocker switches
GU1414* - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Schneider Electric - Ultimate Screwless GU1432BPC
Selectric 5M Plus
Selectric

5M Plus

Model tested: 5MPLUS-103

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame.
Compatible
Additional requirementsRemove frame.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

5MPLUS-*01 / 5MPLUS-*-01 - 1 rocker switch
5MPLUS-*02 / 5MPLUS-*-02 - 2 rocker switches
5MPLUS-*03 / 5MPLUS-*-03 - 3 rocker switches
5MPLUS-*07 / 5MPLUS-*-07 - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Selectric - 5M Plus product reference (selectricuk.co.uk)
Varilight Screwless Metal
Varilight

Screwless Metal

Model tested: XDR3S

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame.
Compatible
Additional requirementsRemove frame.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
Additional requirementsRemove frame.
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

XD*1S - 1 rocker switch
XD*2S - 2 rocker switches
XD*3S - 3 rocker switches
XD*7S - intermediate
XD*71S - two-way + intermediate
XD*77S - 2 intermediates

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Varilight - Screwless Metal product reference (varilight.co.uk)Varilight - varilight catalogue (varilight.co.uk)Varilight - product photo reference
Varilight Urban Screwless
Varilight

Urban Screwless

Model tested: XDY3S.MB

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and seal.
Compatible
Additional requirementsRemove frame and seal.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
Additional requirementsRemove frame and seal.
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

XDY1S.* - 1 rocker switch
XDY2S.* - 2 rocker switches
XDY3S.* - 3 rocker switches
XDY7S.* - intermediate
XDY71S.* - two-way + intermediate
XDY77S.* - 2 intermediates

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Varilight - Urban Screwless product reference (varilight.co.uk)Varilight - product photo reference
Varilight Ultraflat
Varilight

Ultraflat

Model tested: XFC3D

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleNot Compatible
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

XF*1D - 1 rocker switch
XF*2D - 2 rocker switches
XF*3D - 3 rocker switches
XF*7D - intermediate
XF*71D - two-way + intermediate
XF*77D - 2 intermediates

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Varilight - Ultraflat product reference (varilight.co.uk)Varilight - product photo reference
Schneider Ultimate Flat Plate
Schneider

Ultimate Flat Plate

Model tested: GU1232WSS

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleNot Compatible
Method 2
Backplate mounted behind switch
Not CompatibleBorderline
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

GU1212* - 1 rocker switch
GU1222* - 2 rocker switches
GU1232* - 3 rocker switches
GU1214* - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Schneider Electric - Ultimate Flat Plate catalogue
Hamilton Hartland G2
Hamilton

Hartland G2

Model tested: 7G21R23PB-B

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleNot Compatible
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

7G2*R21* - 1 rocker switch
7G2*R22* - 2 rocker switches
7G2*R23* - 3 rocker switches
7G2*R31* - 1 intermediate
7G2*R32* - 2 intermediates
7G2*R21R31* - two-way + intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Hamilton - Hartland G2 product reference (hamilton-litestat.com)
Heritage Brass / M. Marcus Elite Flat Plate
Heritage Brass / M. Marcus

Elite Flat Plate

Model tested: T91.820.ABBK

Installation methodProStandard
Method 1
Backplate mounted over switch
CompatibleCompatible
Method 2
Backplate mounted behind switch
Not CompatibleNot Compatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

T*.800.* - 1 rocker switch
T*.810.* - 2 rocker switches
T*.820.* - 3 rocker switches

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Heritage Brass - Elite Flat Plate rangeHeritage Brass - tested T91.820.ABBK
M2 Decorative
M2

Decorative

Model tested: 6072-004

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove seal.
Compatible
Additional requirementsRemove seal.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

6072-002 - 1 rocker switch
6072-003 - 2 rocker switches
6072-004 - 3 rocker switches
6072-007 - intermediate
6072-008 / 6102-008 / 6104-008 / 6105-008 - 1 rocker switch, retractive

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

M2 - Decorative 6072-004, black nickelM2 - Decorative rangeM2 - Wiring Accessories Catalogue
M2 Decorative Screwless
M2

Decorative Screwless

Model tested: 6605-003

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove seal.
Compatible
Additional requirementsRemove seal.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
Additional requirementsRemove frame.
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

6605-002 - 1 rocker switch
6605-003 - 2 rocker switches
6602-004 / 6604-004 / 6605-004 / 6606-004 - 3 rocker switches
6602-007 / 6604-007 / 6605-007 / 6606-007 - intermediate
6604-008 / 6606-008 - 1 rocker switch, retractive

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

M2 - Decorative Screwless catalogue
Heritage Brass / M. Marcus Studio
Heritage Brass / M. Marcus

Studio

Model tested: Y08.200.PN

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame.
Compatible
Additional requirementsRemove frame.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
Additional requirementsRemove frame.
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

Y*.200.* - 1 rocker switch
Y*.210.* - 2 rocker switches
Y*.220.* - 3 rocker switches

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Heritage Brass - Studio rangeHeritage Brass - tested Y08.200.PN
MK Edge
MK

Edge

Model tested: K14373BSSW

Installation methodProStandard
Method 1
Backplate mounted over switch
CompatibleCompatible
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

K14371* - 1 rocker switch
K14372* - 2 rocker switches
K14373* - 3 rocker switches

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

MK - MK Electric N0 49 Catalogue UKMK003 0116 EN (buildings.honeywell.com)
MK Aspect
MK

Aspect

Model tested: K24373BSSW

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and seal.
Compatible
Additional requirementsRemove frame and seal.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
Additional requirementsRemove frame.
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

K24371* - 1 rocker switch
K24372* - 2 rocker switches
K24373* - 3 rocker switches

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

MK - MK Electric N0 49 Catalogue UKMK003 0116 EN (buildings.honeywell.com)
Gira System 55
Gira

System 55

Model tested: 0296 03

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame and rocker switch.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
Additional requirementsRemove rocker switch.
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

0296 * - 1 rocker switch cover
0295 * - 2 rocker switch covers

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Gira - System 55 original single rockerGira - System 55 original double rocker
Honeywell PEHA 500 Series
Honeywell

PEHA 500 Series

Model tested: D 516

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame.
Method 2
Backplate mounted behind switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame.
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

D 511 / D 512 / D 516 / D 516 GLK / H 516 / H 516 GLK - 1 rocker switch
D 515 / D 515 GL / D 515 T / H 515 - 2 rocker switches
D 517 - intermediate
D 550 / D 550 GLK / D 556 / D 556 GLK / H 550 - 1 rocker switch, push-button

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Honeywell - PEHA 500 Series product reference (honeywell-peha-datenservice.de)
Jung 500 Series
Jung

500 Series

Model tested: 506 U

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleCompatible
Additional requirementsRemove frame and rocker switch.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
Additional requirementsRemove frame and rocker switch.
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

501 U / 501 EU / 501-20 U / 502 U / 502 EU / 503 U / 506 U / 506 EU / 506-20 U - 1 rocker switch
505 U / 505 EU / 505-20 U / 509 U / 509 EU / 509-20 U - 2 rocker switches
507 U / 507 EU / 507-20 U - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Jung - 500 Series product reference (jung-group.com)Jung - 500 Series product reference (jung-group.com)
Legrand PRO 21
Legrand

PRO 21

Model tested: 775806

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleNot Compatible
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
Additional requirementsRemove rocker switch and frame.
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

775801 / 775806 - 1 rocker switch
775807 - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Legrand - LGYJLQLQNX (assets.legrand.com)
Siemens DELTA / i-system
Siemens

DELTA / i-system

Model tested: 5TD2120

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame and rocker switch.
Method 2
Backplate mounted behind switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame.
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

5TA2150 / 5TA2151 / 5TA2162 / 5TA2153 / 5TA2156 - 1 rocker switch
5TA2155 - 2 rocker switches
5TD2120 / 5TD2123 - 1 rocker switch, push-button

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Siemens - ET D1 complete English 2023 202309140749381212 (support.industry.siemens.com)
Busch-Jaeger 2000-series
Busch-Jaeger

2000-series

Model tested: 2000/6 US

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame and rocker switch.
Method 2
Backplate mounted behind switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame.
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

2000/1 US-500 / 2000/2 US / 2000/2 US-101 / 2000/2 US-500 / 2000/6 US / 2000/6 USGL / 2000/6 USK / 2000/6/2 US / 2400/6 US / 2400/6 USK - 1 rocker switch
2000/5 US / 2000/5 USGL / 2000/5 USR-503 / 2000/5 US-507 / 2000/6/6 US-101 / 2400/5 US / 2400/5 USK / 2400/6/6 US-101 - 2 rocker switches
2000/7 US / 2000/7 US-500 / 2000/7 US-506 / 2400/7 US - intermediate
2020 US-201 - 1 rocker switch, push-button
2020 US-205-101 - 2 rocker switches, push-button

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Busch-Jaeger - busch jaeger future linear catalogue (new.abb.com)Busch-Jaeger - product photo reference
Schneider Odace 2011
Schneider

Odace 2011

Model tested: S520205

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame and rocker switch.
Method 2
Backplate mounted behind switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame.
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

S5*0204 - 1 rocker switch
S5*0214 - 2 rocker switches
S520205 - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Schneider - Odace 2011 product reference (se.com)Schneider - Odace 2011 product reference (se.com)Schneider - Odace 2011 product reference (se.com)
Schneider New Odace 2025
Schneider

New Odace 2025

Model tested: S920204

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleUntested
Method 2
Backplate mounted behind switch
Compatible
Additional requirementsRemove rocker switch and frame.
Compatible
Additional requirementsRemove frame.
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

S920204 / S940204 - 1 rocker switch
S920214 / S940214 - 2 rocker switches
S920205 / S940205 - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Schneider - New Odace 2025 product reference (se.com)
Schneider Ovalis Current
Schneider

Ovalis Current

Model tested: Suggested: S320204

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame and rocker switch.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
Additional requirementsRemove rocker switch.
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

S320204 / S340204 - 1 rocker switch
S320214 / S340214 - 2 rocker switches

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Schneider - Ovalis Current product reference (se.com)Schneider - Ovalis Current product reference (se.com)Schneider - Ovalis Current product reference (se.com)
Legrand Céliane (Current)
Legrand

Céliane (Current)

Model tested: CM0001

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame and rocker switch.
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
Additional requirementsRemove frame and rocker switch.
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

CM0001 - 1 rocker switch mechanism
CB0001 / CN0001 / CT0001 - single rocker switch cover
CB2001 / CN2001 / CT2001 - double rocker switch cover

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Legrand - Céliane CM0001 switch mechanismLegrand - Céliane mechanism and cover selectionLegrand - Céliane range catalogue
Legrand dooxie
Legrand

dooxie

Model tested: 600001

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame and rocker switch.
Method 2
Backplate mounted behind switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove rocker switch.
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

600*01 - 1 rocker switch, two-way
600*02 - 2 rocker switches, two-way

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Legrand - dooxie product reference (legrand.fr)Legrand - legrand dooxie interrupteurs prises (assets.legrand.com)
Legrand Mosaic
Legrand

Mosaic

Model tested: 077011L

Installation methodProStandard
Method 1
Backplate mounted over switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame and rocker switch.
Method 2
Backplate mounted behind switch
Compatible
Additional requirementsRemove frame and rocker switch.
Compatible
Additional requirementsRemove frame and rocker switch.
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

077011L / 079211L / 079111L / 078711L - 1 rocker switch, 2-module width

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Legrand - Mosaic Easy-Led 077011LLegrand - Mosaic controls technical dataLegrand - Mosaic antimicrobial white 078711L
Click Mode
Click

Mode

Model tested: CMA011

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleNot Compatible
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Other models in this range

Untested - likely same results

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

CMA011 - 1 rocker switch
CMA012 - 2 rocker switches
CMA013 - 3 rocker switches
CMA025 - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Click Mode — official rangeCMA011 — Mode 10AX 1-gang 2-way plate switchCMA012 — Mode 10AX 2-gang 2-way plate switchCMA013 — Mode 10AX 3-gang 2-way plate switchCMA025 - Mode 10AX 1-gang intermediate switch
LAP Raised Slim White
LAP

Raised Slim White

Model tested: H8183

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleNot Compatible
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

H8181-1W - 1 rocker switch, one-way
H8181-2W - 1 rocker switch, two-way
H8182-2W - 2 rocker switches
H8183 / H8183-2W - 3 rocker switches

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

LAP / Kingfisher - H8183-2W white 3-gang switch
Crabtree Capital Series 4000
Crabtree

Capital Series 4000

Model tested: 4173

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleNot Compatible
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

4070 - 1 rocker switch, one-way
4170 - 1 rocker switch, two-way
4172 - 2 rocker switches
4173 - 3 rocker switches
4175 - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

BG 900 Series White Moulded
BG

900 Series White Moulded

Model tested: 943

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleNot Compatible
Method 2
Backplate mounted behind switch
Not CompatibleBorderline
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

911 - 1 rocker switch, one-way
912 - 1 rocker switch, two-way
942 - 2 rocker switches
943 - 3 rocker switches
913 - intermediate

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

BG - 900 Series plate switchesBG - 943 product reference
Schneider Lisse
Schneider

Lisse

Model tested: GGBL1032WS

Installation methodProStandard
Method 1
Backplate mounted over switch
Not CompatibleNot Compatible
Method 2
Backplate mounted behind switch
Not CompatibleCompatible
Additional requirementsRemove rocker switches.
More information

Other models in this range

Compatibility not established

These models have not been individually tested, but are likely to follow the same results as the model tested above, including compatibility by IYOKI collection, installation method and any additional requirements.

GGBL1012WS - 1 rocker switch, two-way
GGBL1022WS - 2 rocker switches
GGBL1032WS - 3 rocker switches

Colour does not affect compatibility. In model codes, * marks the colour/finish section. Match the remaining model code with your switch.

Manufacturer & catalogue references

Schneider - Lisse GGBL1032WS

Don’t know your model or can’t find your switch? .

You have successfully subscribed!
This email has been registered